Report Suspicious Activity


Models available:
CFM155; CFM195; CFM270; CFM330; CFM470; CFM660

Compact Filter Module
Downloads available:

Models available:
CFM155; CFM195; CFM270; CFM330; CFM470; CFM660

The CFM compact filter module is ideal for use inline at any bulk material transfer point requiring dust control.  It's low profile configuration also makes the CFM the best choice for inline filtration when integrated with a DCL loading spout.  The flow tube can be eliminated making this unit suitable as a bin vent for any tight headroom conditions.

When used as an inline filter, product flows through a central flow tube while isolated from the upward dust entrained airflow. The collected dust is deposited back to the material being handled making the CFM Compact Filter Module an ideal cost effective package especially when compared to a free standing dust collector utilizing duct work, discharge air lock, and often a means to convey the dust back to the system.

The exhaust fan is directly mounted to the assembly eliminating the need for a remote fan placement. The unique design provides internal velocities that are lower than what is normally expected from conventional designs resulting in less load on the filtration media. The filter elements are automatically cleaned during operation with a conventional 80 PSI pulse jet system. The unit can be provided with a final clean feature that is activated at the end of each loading cycle fully cleaning all elements, eliminating residuals.

Filter media is available to accommodate most applications. Pleated design, spun bonded media features a smooth surface finish with exceptional dust cake release. The filter surface is calendared and compacted to resist penetration by collected particulate. This results in better cleaning efficiency and faster return to operating airflow after the cleaning cycle than is possible with traditional media.

DCL offers a large selection of compact filter modules from 155 to 660 square feet of filter media.  Exhaust fans can be sized up to 5000 CFM.

A choice of construction materials allow handling of all types of products; fine, granular, lumpy, abrasive, corrosive, and sanitary applications.  A choice of electrical options are also available allowing for installation in almost any environment; NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.